GetPDUsTPUDPSrcPort

Syntax

long GetPDUsTPUDPSrcPort(this, dword &udpSourcePort);

Function

This function can only be used within aon PDUhandler. If the PDU was received via UDP, with this function the UDP source port can be requested.

Parameters

this Handle to the currently handled (received) PDU object.

udpSourcePort

UDP source port.

Return Values

0: Data access successful.

-1: Wrong bus type.

-2: The requested information was not available. Most probably the PDU was not received by an UDP layer.

-3: The PDU object is invalid.

-4: PDU is not of RX type.

-5: Parameter too small (e.g. array has too less bytes)

-6: Message or PDU is not available (any more)

on PDU engineDataPDU{dword srcAddr, dstAddr, srcPort, dstPort;char srcAddrAsString[16], dstAddrAsString[16];if (GetPDUsTPIPv4SrcAddr(this, srcAddr)==0&& GetPDUsTPIPv4DstAddr(this, dstAddr)==0){IpGetAddressAsString(srcAddr, srcAddrAsString, elcount(srcAddrAsString));IpGetAddressAsString(dstAddr, dstAddrAsString, elcount(dstAddrAsString));if(GetPDUsTPUDPSrcPort(this, srcPort)==0&& GetPDUsTPUDPDstPort(this, dstPort)==0){write("PDU received by UDP from %s:%u to %s:%u", srcAddrAsString, srcPort, dstAddrAsString, dstPort);}if (GetPDUsTPTCPSrcPort(this, srcPort)==0&& GetPDUsTPTCPDstPort(this, dstPort)==0){write("PDU received by TCP from %s:%u to %s:%u", srcAddrAsString, srcPort, dstAddrAsString, dstPort);}}}

GetPDUsTPIPv4DstAddr | GetPDUsTPIPv4SrcAddr | GetPDUsTPIPv6DstAddr | GetPDUsTPIPv6SrcAddr | GetPDUsTPTCPDstPort | GetPDUsTPTCPSrcPort | GetPDUsTPUDPDstPort